routing

ROUTING

The abilities of solid surface material to be curved, shaped and profiled are put to best use with the aid of a router and good quality router bit. We have developed our series of router bits on the principle that the quality of the finish is all the result of the ease with which the router bit can perform the task. Our spiral cutters are specially shaped to enhance extraction removing the debris from the cutting face allowing the router's power to concentrate on cutting the worktop. In the case of our profilers, we have designed them with substantial bodies for a more balanced and stable base that results in a higher quality finish.

Display: List / Grid
Show:
Sort By:

Edge Profiler with Bearing - 3mm Radius (6mm Shank)
This profile cutter adds a decorative 3mm pencil round to your solid surface worktop edges and is designed to be used with edge profilers/routers which use a 6mm shank.  This cutter has been designed with longevity in mind as the 180º rotational blades mean that you get twice the cutting life of a standard fi..
£67.20
Ex VAT: £56.00
Edge Profiler with Bearing - 45 Degree Chamfer (6mm Shank)
This profile cutter adds a decorative 45 degree chamfer to your solid surface worktop edges and is designed to be used with edge profilers/routers which use a 6mm shank.  This cutter has been designed with longevity in mind as the 180º rotational blades mean that you get twice the cutting life of a standard f..
£67.20
Ex VAT: £56.00
Edge Profiler with Bearing - 6mm Radius (6mm Shank)
This profile cutter adds a decorative 6mm pencil round to your solid surface worktop edges and is designed to be used with edge profilers/routers which use a 6mm shank.  This cutter has been designed with longevity in mind as the 180º rotational blades mean that you get twice the cutting life of a standard fi..
£67.20
Ex VAT: £56.00
Bottom Edge Profiler - 45 Degree Chamfer (12.7mm Shank)
Attachment for KARONIA Profilers allowing simultaneous top and bottom edge profiling.​ This innovative attachement for KARONIA's range of edge profilers enables you to add a 45 degree chamfer on the bottom edge of your worktop while you are also creating a profile on the top edge. This tool helps to increase your eff..
£53.04
Ex VAT: £44.20
Edge Profiler with Bearing - 5mm Radius (12.7mm Shank)
Used for creating a 5mm edge profile on solid surface worktops. This profile cutter adds a 5mm round to your solid surface worktop edges. The body of this tool is substantial, designed for maximum stability while performing the profiling operation. This also provides a better foundation for applying the power of the rout..
£101.70
Ex VAT: £84.75
Edge Profiler with Bearing - 45 Degree Chamfer (12.7mm Shank)
Used for creating a 45 Degree Chamfer edge profile on solid surface worktops. This profile cutter adds a 45 Degree Chamfer edge profile to your solid surface worktop edges. The body of this tool is substantial, designed for maximum stability while performing the profiling operation. This also provides a better foundation..
£101.70
Ex VAT: £84.75
Standard Spiral Face Cutter - 35mm Cut (12.7mm Shank)
Used for producing router-finished faces and also trimming jointing faces up to 35mm in depth This solid Tungsten Carbide router bit has been specifically developed for providing high quality finishes. Twin flute spiral configuration evenly applies the router's power across the cutting area for a superior finis..
£70.20
Ex VAT: £58.50
Extra Long Spiral Face Cutter - 55mm Cut (12.7mm Shank)
Used for producing router-finished faces and also trimming jointing faces up to 55mm in depth This solid Tungsten Carbide router bit has been specifically developed for providing high quality finishes. Twin flute spiral configuration evenly applies the router's power across the cutting area for a superior finis..
£85.80
Ex VAT: £71.50
Flush Sink Profile Cutter (12.7mm Shank)
Used for flush fitting solid surface sinks and creating the internal profile. This router cutter has been specifically developed to remove the excess adhesive and worktop material overhanging the sink area when installing any Orello Fabricator Range undermount sink. The nylon guide wheel that runs around the interna..
£102.00
Ex VAT: £85.00
Spiral Aperture Cutter - 35mm Cut (12.7mm Shank)
Used for performing routing operations such as creating cut-outs for hobs or sinks. This solid Tungsten Carbide router bit has been specifically developed to speed up intensive routing operations while maintaining a high quality result. Single flute design utilized to optimise high intensity operations. Upcut operating c..
£89.94
Ex VAT: £74.95
Powered By Karonia
Karonia Store © 2017