TOOLING

Refine Search

Circular Saw Blade For Solid Surface - 160mm X 20mm

Circular Saw Blade For Solid Surface - 160mm X 20mm

Used for cutting solid surface worktops to size. This Triple Chip Flat Tooth saw blade has been s..

£54.60 Ex Tax: £45.50

Jigsaw Blades - T101B (Pack Of 5)

Jigsaw Blades - T101B (Pack Of 5)

Used for cut out and scribing solid surface worktops. These jigsaw blades are ideally specified f..

£5.40 Ex Tax: £4.50

Edge Profiler with Bearing - 3mm Radius (6mm Shank)

Edge Profiler with Bearing - 3mm Radius (6mm Shank)

This profile cutter adds a decorative 3mm pencil round to your solid surface worktop edges and is de..

£67.20 Ex Tax: £56.00

Edge Profiler with Bearing - 45 Degree Chamfer (6mm Shank)

Edge Profiler with Bearing - 45 Degree Chamfer (6mm Shank)

This profile cutter adds a decorative 45 degree chamfer to your solid surface worktop edges and is d..

£67.20 Ex Tax: £56.00

Edge Profiler with Bearing - 6mm Radius (6mm Shank)

Edge Profiler with Bearing - 6mm Radius (6mm Shank)

This profile cutter adds a decorative 6mm pencil round to your solid surface worktop edges and is de..

£67.20 Ex Tax: £56.00

Bottom Edge Profiler - 45 Degree Chamfer (12.7mm Shank)

Bottom Edge Profiler - 45 Degree Chamfer (12.7mm Shank)

Attachment for KARONIA Profilers allowing simultaneous top and bottom edge profiling.​ This innov..

£53.04 Ex Tax: £44.20

Edge Profiler with Bearing - 5mm Radius (12.7mm Shank)

Edge Profiler with Bearing - 5mm Radius (12.7mm Shank)

Used for creating a 5mm edge profile on solid surface worktops. This profile cutter adds a 5mm ro..

£101.70 Ex Tax: £84.75

Edge Profiler with Bearing - 45 Degree Chamfer (12.7mm Shank)

Edge Profiler with Bearing - 45 Degree Chamfer (12.7mm Shank)

Used for creating a 45 Degree Chamfer edge profile on solid surface worktops. This profile cutter..

£101.70 Ex Tax: £84.75

Standard Spiral Face Cutter - 35mm Cut (12.7mm Shank)

Standard Spiral Face Cutter - 35mm Cut (12.7mm Shank)

Used for producing router-finished faces and also trimming jointing faces up to 35mm in depth Thi..

£70.20 Ex Tax: £58.50

Extra Long Spiral Face Cutter - 55mm Cut (12.7mm Shank)

Extra Long Spiral Face Cutter - 55mm Cut (12.7mm Shank)

Used for producing router-finished faces and also trimming jointing faces up to 55mm in depth Thi..

£85.80 Ex Tax: £71.50

Flush Sink Profile Cutter (12.7mm Shank)

Flush Sink Profile Cutter (12.7mm Shank)

Used for flush fitting solid surface sinks and creating the internal profile. This router cutter ..

£102.00 Ex Tax: £85.00

Spiral Aperture Cutter - 35mm Cut (12.7mm Shank)

Spiral Aperture Cutter - 35mm Cut (12.7mm Shank)

Used for performing routing operations such as creating cut-outs for hobs or sinks. This solid Tu..

£89.94 Ex Tax: £74.95

Showing 1 to 12 of 12 (1 Pages)